User Manual

8
Warnings
Monitor
The Monitor and Transmitter need to be kept within 6 feet (approximately 2.0 meters) of each other to
ensure that communication is not interrupted.
Transmitter
The Transmitter should be removed if irritation or reaction to the Transmitter tape develops.
The Transmitter should be disconnected from the Sensor while traveling on an aircraft, or if it interferes
with another transmitting device.
Sensor/Sen-serter
The Sensor may create special needs regarding your medical conditions or medications. Please discuss
these conditions and medications with your doctor before using the Sensor. Bleeding, swelling, irritation
and/or infection at the insertion site are possible risks associated with inserting the Sensor and may
result from improper insertion and maintenance of insertion site.
After insertion, wait 2-3 minutes before attaching the Transmitter to watch for bleeding at the insertion
site. If bleeding occurs, apply steady pressure using a sterile gauze or clean cloth for up to 3 minutes.
If bleeding stops:
1. Attach the Sensor to the system connector.
If bleeding does not stop:
CAUTION: Do NOT attach the Sensor to the system connector.
1. Remove the Sensor and discard.
2. Check the site for redness, bleeding, irritation, pain, tenderness, or inflammation and treat
accordingly.
3. Insert a new Sensor in a different location.