User Manual

4
Monitor User Guide Terms
The following terms and icons are used to describe the Monitor in this User Guide:
➠ Press means to push and release the button.
➠ Hold means to push and keep pressure on the button.
➠ Flashing words or numbers (but not icons) on the screen mean that you can change this information
in the Monitor.
➠ Information that cannot be changed appears on the screen in characters that do not flash.
➠ Button names are always UPPERCASE and bold, e.g., ACT and SEL.
➠ Screen names are always UPPERCASE, e.g., HOME and HIGH.
Monitor Button Functions
This button turns the Monitor On or Off.
SEL
The SEL (Select) button scrolls through the menu screens. It is used
with the ACT button to clear alarms/alerts.
ACT
The ACT (Activate) button lets you make changes to programming,
save information to memory or clear alarms/alerts. You will hear a
beep when you press ACT to confirm the selection.
Up and Down
Arrows
The Up and Down arrows are used to change values or settings. Press
either arrow once to pick the next highest or lowest value. Hold down
either arrow to scroll through the list of values. Hold down either arrow
for more than 5 seconds to speed up scrolling. When you reach the
wanted value press ACT to set. If you do not press ACT within
10-20 seconds, the display will go back to the default screen.
Located on the Down arrow and used from the HOME screen, the
Backlight button turns On or Off the screen light, letting you see the
display at night or in dim lighting. The light will stay on for about 15
seconds after the last button press.