User Manual

60 Chapter 5
4. The screen will display one of these messages:
MESSAGE What it means
➠“Bolus Wizard setup is complete” .............Bolus Wizard is on and all settings are programmed.
➠“Bolus Wizard is off” .......................................Bolus Wizard is off.
➠“Missing Info”.....................................................Bolus Wizard is on, but some of the settings are not programmed.
This screen will show instructions and the missing information.
You must program the missing information before you can use the
Bolus Wizard.
3. To set just one BG Target: To set more than one BG Target:
a. Press ESC. a. Set the start time for
BG Target 2 and
press ACT.
b. Set the value for
Target BG 2 and
press ACT.
c. Repeat steps a and b to
set more BG Targets.
d. Press ESC when you are
done.
_:_
SET START TIME 2
MiniMed
(flashing)
press ESC
- -
mg/dL
_:_
SET START TIME 2*
MiniMed
(flashing) set, then
press
ACT
- -
mg/dL
_:_
SET TARGET BG 2*
(flashing) set, then
press ACT
- -
mg/dL
MiniMed
* Depending on how many
targets you set, this
number can be 2 through