User Manual

The basics... 11
put the pump in Attention mode. For example, if the reservoir is empty, “Empty Reservoir” will appear on the
screen.
When the pump is in Attention mode, it will beep/vibrate periodically to remind you of the condition. The
beep/vibrate frequency varies depending on the condition that caused the alarm. Refer to the section,
“Alarm conditions” in chapter 9 for the conditions that will trigger the Attention mode.
When the pump is in “Attention mode,” all insulin deliveries are stopped.
Menus
The MAIN MENU is the highest level menu. There are submenus, functions, status and programming screens in
the lower menu levels. The menus are described in the following paragraphs. A diagram of the menu structure is at
the back of this user guide.
TIP - If a screen item is flashing (blinking), during programming, press
/
to change the
value.
MAIN MENU - Highest menu level in the menu system. When you press ACT from the HOME screen, the
MAIN MENU will appear.
BOLUS MENU - Contains the settings and function for bolus deliveries. The button allows direct access to
the BOLUS MENU without having to navigate through the menus.
SUSPEND - Stops all current insulin deliveries (basal, bolus and fixed prime). Refer to section, “Stopping your
pump” in chapter 3 for more information.
BASAL MENU - Contains the functions to setup and deliver your basal. Refer to the section, “Basal” in chapter 3
for more information.
PRIME MENU - Contains the functions required to change your reservoir and fill the infusion set with insulin.
Refer to the section, “Changing your infusion set” in chapter 4 for more information.
UTILITIES MENU - Contains features for your safety and convenience. Refer to chapter 8, “Utilities” for more
information.