User Manual

Pump specifications 125
Status screen
➠ Time and insulin type
(always appears)
➠ Status of pump
(i.e., Rewind, Suspended, Low Reservoir, Set Time, etc.)
➠ Block:
(if active) ON
➠ BG meter value:
(most recent BG value received)
(appears if
BG meter is enabled)
XXXmg/dL
time and date (received)
➠ Last bolus information:
type and units delivered (‘S’-Square, ‘N’-Normal, ‘D’-Dual)
delivery time and date
➠ Basal pattern information
(if active) Pattern A or B
➠ Current temp basal information:
(if currently active)
(if active) rate (units per hour)
duration
time remaining
➠ Standard basal delivery data:
(always appears) current basal rate (basal 1, basal 2, etc.)
➠ Reservoir started:
(always appears) date, time
units left
time left
➠ BG Reminder in:
Time remaining before BG reminder is set to go off H:MM h
(if less than 1 hour, 0:XXh where XX is minutes remaining)
➠ Remote On:
(appears if enabled)
➠ Meter On:
(appears if enabled)
➠ Meter Off, Low Batt:
(appears if enabled but battery is low or empty)
➠ Battery Status:
(always appears) Normal, Low, Off, Weak* (*712 pump only)
➠ Auto-off
(appears if enabled) X HR
➠ Current date:
DDD ## MMM YYYY
➠ Serial number:
(always appears)
➠ Pump model number:
(always appears)
➠ Software version:
(always appears)