User Manual

108 Chapter 9
Alarm conditions
Alarms put the pump in “Attention” mode.
A (Alarm)
This alarm will show an “A”
followed by two numbers.
A-alarms cause all insulin
delivery to stop and the
pump to reset. Your pump
settings are retained. If this alarm repeats often, call the
Medtronic MiniMed 24-hour Product Help Line for assis-
tance.
Auto off
Alerts you that no buttons
have been pressed during
the time limit you set for
the AUTO OFF DURATION
feature.
Batt out limit
Occurs if the battery has
been out of the pump for
more than five minutes. The
clock will reset to 12:00A,
01Jan02.
Bolus stopped
If this alarm should occur, it is
very important to check
bolus history to review how
much of the bolus was actu-
ally delivered. Reprogram a
bolus with the amount not
delivered, if required.
Button error
Occurs if a button has been
continually pressed for more
than 3 minutes.
Check settings
When this alarm is active, you
should check and/or repro-
gram your pump settings,
including the time/date.
E (Error)
After receiving this alarm,
note the error number then
call the Medtronic MiniMed
24-hour Product Help Line for
assistance. An error alarm will
show an “E” followed by two
numbers. E-alarms cause all insulin delivery to stop, the
pump resets, and all your settings are cleared.
Empty reservoir
There is no insulin in the reser-
voir. Change the reservoir
immediately.
9:42A
Pump reset
ESC, ACT to clear
Settings preserved
Axx
MiniMed
XX indicates
the alarm number
AUTO
11:17A
Time limit expired
ESC,ACT to clear
No buttons pushed
during time limit
OFF
MiniMed
12:00A
Check time/date
Program as required
Perform Rewind
ESC,ACT to clear
BATT
OUT LIMIT
MiniMed
MiniMed
BOLUS
ESC,ACT to clear
Loose battery cap?
8:35A
STOPPED
Pump dropped or
bumped?
Check bolus history
Reprogram bolus
if required
MiniMed
10:05A
Button pressed for
more than 3 min
ESC,ACT to clear
ERROR
BUTTON
MiniMed
CHECK
Delivery stopped
Reprogram settings
ESC, ACT to clear
SETTINGS
8:35A
5:30A
Settings cleared
Reprogram settings
Call help-line
for assistance
Exx
MiniMed
XX indicates
the error number
EMPTY
3:36P
RESERVOIR
Delivery stopped
Change reservoir
ESC,ACT to clear
MiniMed
mp6024875_012_a.book Page 108 Monday, June 23, 2003 10:54 AM