User Manual

96 Chapter 8
3. Exit the menus when your are done.
Block feature
Block restricts access to pump programming. The factory setting for this feature is off. Block is an important
safety feature if the pump user requires someone else to maintain complete control of pump operation. When
block is on, the remote control is used to deliver a bolus and suspend the pump. Direct pump programming is lim-
ited to suspend, block, and selftest. You can, however, still view status-type screens (STATUS, BOLUS and PRIME
HISTORY, BASAL REVIEW and DAILY TOTALS). Discuss what uses and settings are best for you with your health-
care professional. (You can order the remote control from Medtronic MiniMed.)
Turn block on
NOTE - The vibrate alert-type is disabled when block is on.
1. Go to the BLOCK OPTION screen.
Main > Utilities > Block
2. Select On and press ACT. The HOME screen will appear
with open circles. The Block option is now on and the pump
is in Special mode. Exit the menus.
Add Delete Review
Select
Add ID and press ACT. Select Delete ID and press ACT. Select Review ID and press ACT.
Enter each of the six ID numbers.
Press
ACT after each.
After you set the last number of the
ID, the screen will return to the
REMOTE ID MENU.
Select the remote ID that you want
to delete and press
ACT.
The selected ID is now deleted.
The programmed IDs will show in
the REVIEW REMOTE ID screen.
MiniMed
ADD REMOTE ID
- - - - - -
(flashing)
MiniMed
DELETE REMOTE ID
1 111111
2 222222
3 - - - - - -
MiniMed
REMOTE ID MENU
Add ID
Review ID
Delete ID
MiniMed
REVIEW REMOTE ID
1 - - - - - -
2 222222
3 - - - - - -
BLOCK OPTION
Off
On
MiniMed
ACT
MiniMed
mp6024875_012_a.book Page 96 Monday, June 23, 2003 10:54 AM