User Manual

72 Chapter 6
Using Bolus Wizard for a Square Wave or Dual Wave bolus
If you are using Bolus Wizard to calculate your Square Wave or Dual Wave bolus amounts, you will be
prompted to enter your BG reading and/or the (carb or exchange) units you will eat. Bolus Wizard will use this
input to calculate your suggested correction and/or food bolus amount. If you do not want to use the Bolus Wiz-
ard estimate, you can change it, if desired.
1. Bolus Wizard must be turned on and the settings must be programmed. Also, make sure the dual/square
option is turned on.
NOTE - If you want to use the pump-to-meter link, make sure the meter option is on. Refer to the sec-
tion, “Meter option” for instructions.
2. After you enter your BG and/or food entry, review the informa-
tion in the ESTIMATE DETAILS screen. Press
ACT to continue to
step 3. If you need to make any changes, press
ESC to return to
the ENTER BG screen and make changes as necessary.
3. In the next screen, select
Square Wave Bolus or
Dual Wave Bolus as desired and press ACT.
NOTE - If you are using Bolus Wizard and it calculates that your
bolus includes a portion to correct your high BG, the Square Wave
bolus will not be available. This helps you to select a bolus type
(Normal or Dual Wave) that has an immediate delivery option to
cover your high BG.
Food intake: 45gr
(Meter) BG: 160
Food: 3.0U
Correction: 2.0U
Active Ins: 1.0U
Est total: 4.0U
(values shown are
for example only)
ESTIMATE DETAILS
ACT to proceed,
ESC to back up
MiniMed
BOLUS EST: 10.5U
NormalBolus
Square Wave Bolus
Dual Wave Bolus
ACT
(using Bolus Wizard)
MiniMed
BOLUS TYPE
NormalBolus
Square Wave Bolus
Dual Wave Bolus
ACT
(without Bolus Wizard)
MiniMed
BOLUS EST: 10.5U
NormalBolus
Dual Wave Bolus
mp6024875_012_a.book Page 72 Monday, June 23, 2003 10:54 AM