User Manual

Using Bolus Wizard 63
5. Review the information in the ESTIMATE DETAILS
screen. Press
ACT to continue to step 6. If you need to
make any changes, press
ESC to return to the ENTER
BG screen (step 3) and make changes as necessary.
6. In the SET BOLUS screen, the estimated bolus amount will show (flashing).
Change the amount if desired. Press
ACT to accept.
7. Press
ACT to accept and deliver the bolus. The BOLUS DELIVERY screen will
appear. The pump will beep or vibrate at the start and end of the bolus. As the
bolus is delivered, the screen will show the bolus type and amount until the total
units have been delivered. The screen will then default to the HOME screen.
4. In the ENTER FOOD screen, if this is a food bolus: if this is a correction bolus:
enter the food value you
will eat and press
ACT.
select 0 (zero) as the value and
press
ACT.
MiniMed
ENTER FOOD
grams*
45
(flashing)
* or exch
MiniMed
ENTER FOOD
grams*
0
(flashing)
* or exch
Food intake: 45gr
(Meter) BG: 160
Food: 3.0U
Correction: 2.0U
Active Ins: 1.0U
Est total: 4.0U
(values shown are
for example only)
ESTIMATE DETAILS
ACT to proceed,
ESC to back up
MiniMed
SET BOLUS
4.0U
ACT
to accept
MiniMed
BOLUS DELIVERY
0.
1U
3:24P
NORMAL
mp6024875_012_a.book Page 63 Monday, June 23, 2003 10:54 AM