User Manual

Using Bolus Wizard 59
Review your Bolus Wizard settings
Check your Bolus Wizard settings in the REVIEW SETTINGS screen. If necessary, compare this information
with your information in the Bolus Wizard settings table.
Bolus > Bolus Wizard Setup > Review Settings
1. In the REVIEW SETTINGS screen, scroll through the text to
view your Bolus Wizard settings.
2. If an arrow appears next to an item, that item has more than
one setting. You can review these settings.
a. Select the item and press
ACT.
All the settings for that item will appear.
b. Scroll through the settings for that bolus setting.
3. Exit the menus when you are done.
Meter option
You can setup your pump to automatically receive your
BG reading from the Paradigm Link meter. This meter may not be
available in all countries. Check with your local Medtronic MiniMed
representative. Your pump is set at the factory with the meter
option turned off. Programming your Paradigm Link meter ID,
links your pump to the meter. If you do not “link” the meter to
your pump, you will enter your BG readings manually. Each Para-
digm Link meter has its own unique ID. You can link up to three (3)
meters to your pump.
When the pump is idle (at the HOME screen), it will beep or vibrate when it receives a BG reading from the
Paradigm Link meter. The reading will appear on the pump screen.
NOTE - The use of RF (radio frequency) devices with the pump reduces pump battery life.
You have to turn on the meter option to add, delete or review the meter ID(s) programmed in your pump.
The meter ID is the serial number printed on the back of the Paradigm Link meter. See the user guide that came
with your Paradigm Link meter for detailed information on how to use it.
Carb Units:
Wizard
REVIEW SETTINGS
On
Carb Ratios:
grams
MiniMed
12:00A 15
6:00A
10
BG Units:
mg/dL
Ins Sensitivity:
12:00A
30
6:00A
35
BG Targets:
12:00A
110
6:00A
100
ACT
MiniMed
WIZARD SETUP
Edit Settings
Review Settings
BG
Readings
Pump
Paradigm Link
meter
mp6024875_012_a.book Page 59 Monday, June 23, 2003 10:54 AM