User Manual

58 Chapter 5
4. The screen will display one of these messages:
MESSAGE What it means
➠ “Bolus Wizard setup is complete” .............Bolus Wizard is on and all settings are programmed.
➠ “Bolus Wizard is off” .......................................Bolus Wizard is off.
➠ “Missing Info”.....................................................Bolus Wizard is on, but some of the settings are not programmed.
This screen will show instructions and the missing information.
You must program the missing information before you can use the
Bolus Wizard.
3. To set just one BG Target: To set more than one BG Target:
a. Press
ESC. a. Set the start time for
BG Target 2 and
press
ACT.
b. Set the value for
BG Target 2 and
press
ACT.
c. Repeat steps a and b to
set more BG Targets.
d. Press
ESC when you are
done.
_:_
SET START TIME 2
MiniMed
(flashing)
press
ESC
- -
mg/dL
_:_
SET START TIME 2*
MiniMed
(flashing) set, then
press
ACT
- -
mg/dL
_:_
SET BG TARGET 2*
(flashing) set, then
press
ACT
- -
mg/dL
MiniMed
* Depending on how many
targets you set, this num-
ber can be 2 through 8.
mp6024875_012_a.book Page 58 Monday, June 23, 2003 10:54 AM