User Manual
33
Chapter 4
Starting on insulin
Prepare your pump for use
Before continuing with the steps in this chapter, we recommend that you watch your pump training video and
complete your pump start training (U.S. only).
NOTE - Your pump is in a “training mode” when it is sent to you. It has limited functions while in this mode.
When you rewind your pump for the first time, the training mode is canceled and all pump functions become
available. The “Clear pump” function will also cancel the training mode. Your pump settings will return to the
default factory settings.
To use your pump with insulin, you must:
1. do a “Clear pump” function
2. set the time and date,
3. program your settings as instructed by your healthcare professional,
4. install the reservoir,
5. prime the infusion set.
You will need these items:
➠ Pump
➠ Insulin
➠ Paradigm reservoir and user guide
➠ Paradigm infusion set and user guide
mp6024875_012_a.book Page 33 Monday, June 23, 2003 10:54 AM