User Manual

Basic programming 31
Resume pump delivery
When the pump is suspended, it defaults to the HOME screen with solid circles.
Do these steps to resume your pump and basal delivery:
1. From any screen, press
ACT until the RESUME screen appears.
Press
ACT again.
2. Your pump will beep once, then the HOME screen will appear (with no circles).
NOTE - A bolus or fixed prime that was stopped by suspend will not restart
when you resume your pump. You must reprogram and activate it to finish
delivery.
Practice:
Resume basal delivery after a suspend
Make sure you are NOT connected to your pump while practicing.
Give a 3.0 unit bolus now. While it is delivering, suspend the bolus.
Check here if you were able to suspend the bolus.
Now restart the pump.
Check here if you were able to restart the pump.
RESUME
ACT-Restart Basal
Stopped at 1:05P
ACT
ACT
MiniMed
MiniMed
MiniMed
mp6024875_012_a.book Page 31 Monday, June 23, 2003 10:54 AM