User's Manual

Personal Pump Communicator (PPC)
44
6. The calculated accuracy will be displayed briefly.
Record this value on the refill form.
Priming
A priming bolus is not intended as a therapeutic bolus.
It should only be used when the Pump is not
implanted.
The Priming Bolus is used during the preparation of the Pump for implantation.
This feature “Primes” the Pump piston chamber, outlet port and Catheter. The
Pump will pulse approximately 500 times during this function. To access this fea-
ture, the Pump must be in “PUMP STOPPED” mode.
1. From the “PUMP STOPPED” screen, press SEL.
The screen will begin flashing.
2. Press the  and  buttons at the same time until
the “ENTER SUPERVISOR PASSWORD”
screen appears.
3. Re-enter the supervisor password, pressing ACT
after each letter or number is entered. The factory
preset password is: YIQ8. If the password has
been changed, enter the new password.
When the
Supervisor Password is successfully entered, the
screen will change to “PUMP REFILL”. Press
SEL until the “PRIMING” screen appears.
4. Press ACT and “NO” appears flashing. Press the
 and  buttons to change to “YES”, then press
ACT.
CALCULATED
ACCURACY
_ _ %
!
WARNING
08:13 Oct 12
PUMP STOPPED
ENTER
SUPERVISOR
PASSWORD
YIQ8
PRIMING
PRIMING NO
99.8U