User's Manual

Personal Pump Communicator (PPC)
40
Setup II
Audio Bolus
The Audio Bolus feature allows the user to deliver a bolus without looking at the
PPC screen. There are two Audio Bolus increments, 0.4U and 0.8U. With each
press of the  button, the PPC will beep one time (0.4U setting) or two times
(0.8U setting), depending on the delivery amount selected per button press.
Activating the Audio Bolus feature
1. From the “SETUP II” screen, press ACT. The
“AUDIO BOLUS" screen is shown.
2. Press ACT, and the screen changes to “SET
AUDIO BOLUS” with “OFF/ON” flashing. Use
the  and  buttons to choose “ON” to activate
the Audio Bolus feature or “OFF” to disable it.
Then press ACT.
3. If “ON” was chosen, the “SET STEP AUDIO
BOLUS” appears with a step value of 0.4U or
0.8U flashing on the screen. Use the  and 
buttons to choose between a step rate of 0.4U or
0.8U. Press ACT. The Audio Bolus feature is
now activated.
NOTE: If “OFF” is chosen, pressing the  button will have no
effect.
AUDIO BOLUS
ON
0.4U
SET
ON
AUDIO BOLUS
0.4U
SET STEP
AUDIO BOLUS
0.4U