User's Manual

Personal Pump Communicator (PPC)
34
Personal events
This feature allows the user to enter event codes into the PPC memory, and
record the time and date of entry. Preset event codes are: 1 = meal, 2 = snack, 3 =
sick and 4 = exercise. In addition, other event codes A, B and C can be entered to
record other important events. These other event codes should be documented
prior to their use.
To access the “EVENTS” screen in the main menu, “ON” must be activated in
the “SETUP II” menu, “PERSONAL EVENTS” screen.
1. From the Time/Date screen, press SEL until
“SETUP PUMP” is displayed, then press ACT.
Press SEL until “SETUP II” is displayed, then
press ACT. Press SEL until “PERSONAL
EVENTS” screen is displayed.
2. Press ACT and “ON” or “OFF” begins flashing.
3. Use the  and  buttons to select “ON”, then
press ACT again. The “PERSONAL EVENTS”
screen will now appear on the main menu. Allow
the PPC to return to the Time/Date screen.
4. To set an event: From the Time/Date screen press
SEL until the “EVENT” screen is displayed then
press ACT. The screen changes to “SET
EVENT” with the word “MEAL” flashing. Use
the  and  buttons to select the desired event.
5. Press ACT and the current time will appear
flashing. Use the  and  buttons to enter the
time the event occurred. Press ACT when the
proper time is displayed. Then allow the screen
return to Time/Date.
NOTE: Only historic or current event times can be entered.
NOTE: If the Personal Events feature is turned “OFF” in
“SETUP II”, events cannot be entered into the PPC.
OFF
PERSONAL
EVENTS
EVENTS
PERSONAL
ON/OFF
SET
PERSONAL
EVENTS
ON/OFF
SET
EVENT
MEAL
SET TIME
EVENT
MEAL
07:32Am