User's Manual

Personal Pump Communicator (PPC)
33
4. Place the PPC near the Pump and complete the
communication process.
5. When the communication is complete, the Pump
will beep once. The PPC screen will briefly show
the “TEMP BASAL” screen before returning to
the Time/Date screen.
NOTE: When the Pump is delivering a Temporary Basal rate, the
first screen displayed when SEL is pressed is “TEMP
BASAL.” The PPC will also beep every 30 minutes to
alert the user that a Temporary Basal rate is currently
active.
Stop a temporary basal rate
1. From the Time/Date screen press SEL until the
“TEMP BASAL” screen is displayed. Press ACT
and the “SET DURATION” appears, with the time
duration flashing. Press  once until it resets to
dashes. Then press ACT.
2. Place the PPC near the Pump and complete the
communication process.
3. When the communication is complete, the PPC
will briefly return to the “TEMP BASAL” screen
with the amount dashes flashing. Allow the PPC
to return to the Time/Date screen.
PPC
COMMUNICATING
TEMP BASAL
08:13
OCT 02
TEMP BASAL
_ _ 1.5U/H
SET DURATION
PPC
COMMUNICATING
TEMP BASAL
_ _
SET AMOUNT
_ _U/H