User's Manual

Personal Pump Communicator (PPC)
28
5. Blinking dashes will now appear under the bolus
amount entered.
Use the  and  buttons to enter a time duration
for the Square Wave Bolus, in one-half hour
increments from 30 minutes to four hours.
6. Press ACT and the “CONFIRM BOLUS” screen
is displayed, with the screen flashing. Confirm
the Dual Wave Bolus by pressing ACT again.
7. Place the PPC over the pump and complete the
communication process.
8. When the bolus programming is complete, the
PPC will beep once and then briefly display the
amount of insulin currently delivered.
The Pump will beep at each of the first five
strokes (if audio feedback is ON). The PPC
beeps at the end of the bolus. Three segments of
the insulin delivery icon will be displayed and
spinning slowly during the bolus delivery. By
pressing SEL, you can read the amount of
insulin delivered.
Review bolus history
To review the type, amount, time and day of your last 512 insulin boluses.
1. From the Time/Date screen, press SEL. The
“BOLUS” screen is displayed, showing the last
bolus programmed.
Use the  and  buttons to display previous
boluses, along with the time and day each bolus
was delivered.
SET BOLUS
IMM EXT
2:00
2.0U
CONFIRM BOLUS
IMM
2:00
EXT
2.0U 2.0U
PPC
COMMUNICATING
16:06 JAN 03
BOLUS 2.0U
08:23 Jan 02
BOLUS
IMM EXT
_ _ U
PROG
_ _ U
_ _