User's Manual

Personal Pump Communicator (PPC)
27
7. When the bolus programming is complete, the
PPC will beep once and then briefly display the
amount of insulin currently delivered.
The Pump will beep at each of the first five
strokes (if audio feedback is ON). The PPC
beeps at the end of the bolus. Three segments of
the insulin delivery icon will be displayed and
spinning slowly during the bolus delivery. By
pressing SEL you can read the amount of insulin
delivered.
Set a Dual Wave Bolus
The Dual Wave Bolus programs a Normal Bolus immediately followed by a
Square Wave Bolus.
To access this feature you must first turn the Variable Bolus feature ON in the
SETUP II menu.
1. From the Time/Date screen, press SEL. The
“BOLUS” screen is displayed, showing the last
bolus programmed with the time and date
flashing.
2. Press ACT and the “SET BOLUS TYPE” screen
appears. Press the  and  buttons to select
“DUAL.” Press ACT.
3. The “SET BOLUS” screen appears, with dashes
under “IMM” flashing. Use the  and  buttons
to enter the immediate
portion of the Dual Wave
Bolus. Press ACT.
4. The “SET BOLUS” screen now shows dashes
flashing under “EXT.”
Use the  and  buttons to enter the extended
portion of the Dual Wave Bolus. Press ACT.
16:06 JAN 03
BOLUS 0.0U
08:13
BOLUS
_ _
IMM
_ _U
Jan 02
_ _U
EXT
SET
DUAL
BOLUS TYPE
SET BOLUS
IMM
2.0U
SET BOLUS
IMM EXT
2.0U 2.0U