User Manual

Programming Your Pump
30
NOTE: In24hr.displaymode,“00:00” indicates a start
time of MIDNIGHT. In 12hr. display mode, the
screen will read “12:00am.”
6. Press ACT and “SET RATE” and “2”
appears, indicating you will now program
Basal Rate “2” in Basal Delivery Pattern
“A.” The Basal Rate is flashing.
7. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to enter a Basal
Rate and start time for Basal Rate #2.
8. Continue this procedure until all desired
Basal Rates and start times are pro-
grammed. Then press ▼
▼▼
▼ and ACT.
9. Place the PPC near the Pump to complete
the programming.
10. The screen will calculate and briefly dis-
play the total daily Basal insulin from the
Basal Rates you have programmed.
NOTE: To set multiple basal pro-
files in the other patterns
(A, B, C), select the pattern in Setup II menu and
follow the above procedure.
Set a temporary basal rate
A Temporary Basal Rate is often used when a brief change in basal deliv-
ery is required, for example during exercise.
1. From the Time/Date screen press SEL
until the “TEMP BASAL” screen is dis-
played.
BASAL RATE : A 2
--
U/H
05:00
SET RATE
PPC
COMMUNICATING
24 HOUR TOTAL
4.8
U
TEMP BASAL
--
U/H
--