User Manual

Programming Your Pump
22
Set an immediate bolus (variable bolus option is “on”)
1. From the Time/Date screen press SEL
until the “BOLUS” screen is displayed.
The last bolus value programmed and the
Time and Date will be flashing.
2. Press ACT and “SET BOLUS TYPE”
appears. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to
choose “NORMAL.”
3. Press ACT and “IMM” appears with the
dashes underneath flashing.
4. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to enter an
immediate bolus
amount
5. Press ACT and the screen shows “CON-
FIRM IMM.”
6. If the number was not correct, wait for the
screen to return to Time/Date and then
repeat this procedure to enter the correct
value.
7. If the number you entered for the immedi-
ate bolus is correct, press ACT to con-
firm it. Place the PPC near the Pump to
complete the programming.
8. The PPC will beep once and display the
amount of insulin delivered. If the Alarm
Feedback feature is “ON,” the Pump will
beep during each of the first five strokes.
9. The PPC will beep when the bolus deliv-
ery is complete. Three segments of the insulin delivery icon will be
displayed and spinning slowly during the bolus delivery. By pressing
SEL you can see the amount of insulin being delivered.
08:23 Jan 04
BOLUS
--
IMM EXT
--
U
--
U
SET
NORMAL
BOLUS TYPE
SET BOLUS
IMM
--
U
CONFIRM
IMM
2.6
U
PPC
COMMUNICATING
08:23 JAN 04
BOLUS
0.0
U