Installation Instructions Part 1

Personal Pump Communicator (PPC)
62
Set an audio bolus from the main menu bolus screen
1. From the Time/Date screen press the ▲
▲▲
▲
button. The PPC beeps either one or two
times, depending upon the audio bolus
step amount set. The user counts the
number of beeps to determine how much
insulin was programmed.
2. In this example the PPC was programmed
for a 0.8U increment, and the PPC beeps
two times for the 0.8U bolus.
Press ACT and the audio sequence
repeats to confirm the bolus amount.
Press ACT twice and the Pump will be
programmed. The PPC beeps once when the programming is com-
pleted. Place the PPC on the Pump to complete the communication
process.
NOTE: While an audio bolus is being delivered, the ▲
▲▲
▲
button will not function.
Variable bolus
To access the Variable Bolus feature enter “SETUP II” and press SEL
one time.
The screen will display “VARIABLE
BOLUS”. Press ACT.
The screen will now display “SET VARI-
ABLE BOLUS” and “ON or OFF” will be
flashing. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to select
“ON” or “OFF”, then Press ACT.
SET BOLUS
0.8U
IMM
PPC
COMMUNICATING
VARIABLE
BOLUS
ON
SET
VARIABLE
BOLUS
Dmp9196021-011_c.book Page 62 Thursday, April 4, 2002 8:15 AM