Installation Instructions Part 1

Personal Pump Communicator (PPC)
54
Stop a temporary basal rate
1. From the Time/Date screen press SEL
until the “TEMP BASAL” screen is dis-
played. Press ACT and the “SET DURA-
TION” appears, with the time duration
flashing. Press ▼
▼▼
▼ once until it resets to
dashes. Then press ACT.
2. Place the PPC near the Pump and com-
plete the communication process.
3. When the communication is complete, the
PPC will briefly return to the “TEMP
BASAL” screen with the amount dashes
flashing. Allow the PPC to return to the
Time/Date screen.
Personal events
This feature allows the user to enter event codes into the PPC memory,
and record the time and date of entry. Preset event codes are: 1 = meal, 2
= snack, 3 = sick and 4 = exercise. In addition, other event codes A, B and
C can be entered to record other important events. These other event
codes should be documented prior to their use.
To access the “EVENTS” screen in the main menu, “ON” must be acti-
vated in the “SETUP II” menu, “PERSONAL EVENTS” screen.
1. From the Time/Date screen, press SEL
until “SETUP PUMP” is displayed, then
press ACT.
Press SEL until “SETUP II” is displayed,
then press ACT.
Press SEL until “PERSONAL EVENTS”
is screen is displayed.
TEMP BASAL
--- --- 1.5u/h
SET DURATION
PPC
COMMUNICATING
TEMP BASAL
--- --- --- --- u/h
SET AMOUNT
OFF
PERSONAL
EVENTS
Dmp9196021-011_c.book Page 54 Thursday, April 4, 2002 8:15 AM