Installation Instructions Part 1

Table Of Contents
Part 2: Additional PPC programming features
47
Set a dual wave bolus
The Dual Wave Bolus programs a Normal Bolus immediately followed
by a Square Wave Bolus.
To access this feature you must first turn the Variable Bolus feature ON in
the SETUP II menu.
1. From the Time/Date screen, press SEL.
The “BOLUS” screen is displayed, show-
ing the last bolus programmed with the
time and date flashing.
2. Press ACT and the “SET BOLUS TYPE”
screen appears. Press the
and
but-
tons to select “DUAL.” Press ACT.
3. The “BOLUS” screen appears, with
dashes under “IMM” flashing. Use the
and
buttons to enter the immediate
portion of the Dual Wave Bolus. Press
ACT.
4. The “BOLUS” screen now shows dashes
flashing under “EXT.”
Use the
and
buttons to enter the
extended
portion of the Dual Wave
Bolus. Press ACT.
5. Blinking dashes will now appear under
the bolus amount entered.
Use the
and
buttons to enter a time
duration for the Square Wave Bolus, in
one-half hour increments from 30 min-
utes to four hours.
08:13 Jan 02
BOLUS
--- ---
IMM EXT
--- --- U ---- ---- U
SET
DUAL
BOLUS TYPE
SET BOLUS
IMM
2.0u
SET BOLUS
IMM EXT
2.0u 2.0u
SET BOLUS
IMM EXT
2.0u 2.0u
2:00
Dmp9196021-011_c.book Page 47 Thursday, April 4, 2002 8:15 AM