Technical Specs Part 3

System Alarms and Messages
124
Initialize alarm
Attempting to initialize a PPC to a Pump that is not compatible with it,
results in one of the following messages. The physician should press SEL
and ACT to clear the alarm, then verify the personal ID of the Pump is
correct.
Attempting to initialize a PPC to a Pump that contains invalid stroke vol-
ume or insulin concentration information, results in one of the following
messages to be displayed. Contact MiniMed for instructions.
Responding “NO” to the “INITIALIZE PPC TO PUMP” screen eight
consecutive times, results in the following message to be displayed. Step
away from any other Pump in the area and perform the request again.
PPC Display Type of Alarm
PUMP ERROR
0 or 1
1
PPC Display Type of Alarm
PUMP ERROR
40 or 41
1
PPC Display Type of Alarm
TELEMETRY
ERROR
20
1
Dmp9196021-011_c.book Page 124 Wednesday, April 3, 2002 5:06 PM