Technical Specs Part 3
Table Of Contents
- CHAPTER 9 System Alarms and Messages
- Pump alarms
- Alarm feedback
- Pump low battery
- Depleted pump battery
- System error
- Pump self test fail
- PPC alarms
- PPC low battery
- PPC depleted battery
- PPC needs servicing
- Low reservoir
- Empty reservoir
- Telemetry communication error
- Initialize alarm
- PPC not initialized
- Battery replacement
- Initialize to factory defaults
- Pump stopped
- Pump suspended
- Auto off
- Hourly maximum exceeded
- Pump alarm table
- Pump alarms
- CHAPTER 10 Troubleshooting Pump System Under-delivery
- CHAPTER 11 Medtronic MiniMed 2007C Implantable Insulin Pump System
Pump alarms
123
Clear this message by pressing SEL and ACT, and then continue pro-
gramming. Users should be instructed to report this alarm to their physi-
cian as soon as possible and schedule an appointment for a Pump refill. It
is important not to allow the Pump to deplete its insulin supply as this
may result in catheter blockage.
Telemetry communication error
If programming is interrupted after partial transmission of a command,
the PPC will display the following message on the display screen:
Reposition the PPC near the Pump, and then press SEL and ACT. The
PPC will attempt to resume communication with the Pump.
PPC Display Type of Alarm
TELEMETRY COMM
ERROR3
1
Dmp9196021-011_c.book Page 123 Wednesday, April 3, 2002 5:06 PM