Installation Instructions Part 1

Table Of Contents
Personal Pump Communicator (PPC)
60
Initialize PPC to Pump
From the “SETUP PUMP” screen press ACT until “INITIALIZE PPC
TO PUMP” is displayed. This option “marries” the PPC to the Pump, and
it is used to initialize a new PPC. For initialization programming follow
the steps described in, Part 1: PPC/Pump sytem initialization.
Setup II
“SETUP II” permits access to an additional group of Setup menus for the
Pump. From the “SETUP PUMP” screen, press ACT until the “SETUP
II” screen is displayed. Setup II features are presented in the next section.
Exit setup menu
1. From the SETUP “pump” screen, press
SEL until the “EXIT SETUP MENU”
screen is displayed. Press ACT. The PPC
will return to the Time/Date screen.
EXIT SETUP MENU
Dmp9196021-011_c.book Page 60 Thursday, April 4, 2002 8:15 AM