Installation Instructions Part 1

Table Of Contents
Part 1: PPC/Pump system initialization
33
6. The screen will read “PUMP SUS-
PENDED”. The Pump and PPC are
now “married”.
7. Press SEL, then ACT and place the PPC
near the Pump.
8. The screen now reads
“PUMP INITIALIZED”.
9. Press SEL and then ACT again, and the
PPC will display the Time/Date screen.
NOTE: When the alarm type is set to “VIBRATE” the
beeps from the PPC during normal programming
will be low volume.
PUMP SUSPENDED
PPC
COMMUNICATING
PUMP INITIALIZED
11:16 JAN O2
Dmp9196021-011_c.book Page 33 Thursday, April 4, 2002 8:15 AM