User Manual

Programming Your Pump
41
Pump setup II
The “SETUP II” screen allows you to program additional features into
your PPC. Your doctor will normally program “SETUP II” features for
you.
1. From the “SETUP” screen, press SEL until the “SETUP II” screen is
displayed.
Turn on the audio bolus feature
The “AUDIO BOLUS” feature allows you to deliver a bolus without
looking at the PPC screen. There are two Audio Bolus amounts you can
deliver, 0.4U and 0.8U. With each press of the ▲
▲▲
▲ button, the PPC will
beep one time (0.4U setting) or two times (0.8U setting).
1. From the “SETUP II” screen, press ACT.
The “AUDIO BOLUS” screen appears.
2. Press ACT, and the screen changes to
“SET AUDIO BOLUS” with “ON” flash-
ing.
3. Use the ▲
▲▲
▲ and ▼
▼▼
▼ buttons to choose “ON”
to turn on the Audio Bolus feature.
Choose “OFF” to turn the Audio Bolus
off. Press ACT again.
NOTE: If “OFF” is chosen, press-
ing the
▲ and ▼ buttons
will have no effect.
4. If “ON” was chosen, the “SET STEP
AUDIO BOLUS” screen appears, with a
bolus amount of 0.4U flashing.
0.4
U
AUDIO BOLUS
ON
SET
0.4
U
AUDIO BOLUS
ON
SET STEP
0.4
U
AUDIO BOLUS
ON