User's Manual

Rewind A feature used when changing a reservoir. It returns the
piston to its starting position and allows a new reservoir
to be placed into the pump.
sensitivity See insulin sensitivity factor.
sensor (glucose sensor) The small part of the continuous glucose monitoring
system that you insert just below your skin to measure
glucose levels in your interstitial fluid.
sensor glucose (SG) Refers to glucose (sugar) that is present in the interstitial
fluid and is measured by a glucose sensor.
Set Change reminder A reminder that you can set to change your infusion set.
SG Abbreviation for sensor glucose. See sensor glucose.
Sleep mode A state in which your pump is fully functional, but the
screen is dark. Your pump automatically enters sleep
mode when you have not pressed any buttons for about
two minutes.
SmartGuard™ A feature that can automatically stop and resume insulin
delivery based on your sensor glucose values and low
limit.
Square Wave™ Bolus A bolus delivered evenly over a specified time period.
Suspend before low A feature that suspends insulin delivery when the sensor
predicts sensor glucose value is approaching your low
limit.
Suspend Delivery This feature stops all insulin delivery until you resume it.
Only the basal insulin restarts when delivery is resumed.
Suspend on low A feature that suspends insulin delivery when your
sensor glucose value reaches or falls below your low
limit.
Temp Basal Rate
(temporary basal rate)
A feature that allows you to temporarily increase or
decrease your current basal rate for a duration of time
that you specify.
transfer guard The plastic piece that comes attached to the reservoir. It
is used to connect the reservoir to the insulin vial while
filling the reservoir with insulin.
282 Glossary
MP6025958-022 / A
RELEASED