User's Manual

Guidance and manufacturer's declaration
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The MiniMed 640G insulin pump is intended for use in the electromagnetic
environment specified below. The customer or the user of the MiniMed insulin
pump should make sure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment -
Guidance
RF emissions
Test: 47 CFR Part 15,
Subpart C Section
15.247(a)(2)/RSS-210
FHSS– DAOO-705,
DTS-KDB 558074,
ANSI C63.4, RSS-Gen,
FCC Part 15 Section
15.109, Class B/ANSI
c63.4 (2009)
•6 dB and 99%
Bandwidths: Pass
•Maximum Output
Power: Pass
• TX Spurious
Emissions: Pass
• Power Spectral
Density: Pass
The MiniMed insulin pump must emit
electromagnetic energy in order to
perform its intended function. Nearby
electronic equipment may be
affected.
RF emissions
EN55011 (2009)+A1
Class B The MiniMed insulin pump is suitable
for use in all establishments,
including domestic and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
RTCA DO 160G (2010)
20.5 and 21.5
Complies
ARIB STD-T66 Complies
262 Chapter 15
MP6025958-022 / A
RELEASED