User's Manual

3. Select Save.
Note: If you decide not to use the Auto Calibration in the future,
select Auto Calibration to turn off the feature.
Where to enter your calibration BG meter reading
There are several screens on the pump where you can enter a BG meter reading
for calibration. These screens are described in the following table. These options
are available only if you are using a sensor, and your transmitter is wirelessly
connected with your pump.
Note: If you are using a compatible Bayer meter and want to calibrate
using every valid BG meter reading sent to your pump, you can use the
Auto Calibration feature. For details about Auto Calibration, see Setting up
Auto Calibration, on page 184.
Pump screen How to enter your calibration BG
Home screen
When the calibration option is available,
you can access the Calibrate Sensor
screen. First highlight the sensor graph on
the Home screen. Then press and hold the
button to access the calibration screen.
Enter a BG meter reading specifically for
calibration.
Calibrate Sensor screen
Menu > Sensor Settings > Calibrate
Sensor
Enter a BG meter reading specifically for
calibration.
BG Meter screen
The BG Meter screen appears
automatically when your compatible Bayer
meter sends a BG meter readings to your
pump.
Select the Calibrate Sensor option to
calibrate your sensor with the current BG
meter readings.
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 185
MP6025958-022 / A
RELEASED