User's Manual

Connecting your pump and transmitter using Manual Connect:
1. You need the serial number for your transmitter during the connection
process. Write down the serial number in the following space provided.
Find your serial number here: Write it here:
Write your serial number here, include any
letters:
SN GT __ __ __ __ __ __ __ __
2. Attach your transmitter to the charger, and make sure the transmitter is fully
charged. Keep your transmitter attached to the charger.
charger
transmitter
Note: Both lights on the charger are off when the transmitter is fully
charged. For more information, see your transmitter user guide.
If you remove the transmitter from the charger to write down the
serial number, the green charger light may start flashing when you
attach the transmitter to the charger again. You can continue the
connection process without waiting for the charger light to stop
flashing.
3. On the pump, go to the Enter Device SN screen.
Menu > Utilities > Device Options > Connect Device > Manual Connect
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 179
MP6025958-022 / A
RELEASED