User's Manual

The following happens when you start the search process:
• On your pump, a message appears to let you know your pump is
searching.
• On your transmitter, a green light flashes briefly and then turns off.
Note: The search process can take up to two minutes. You cannot
access your pump screens or suspend your pump during the search
process.
When your pump finds the transmitter, the Confirm Device SN screen
appears.
6. Ensure the transmitter serial number on your pump screen matches the serial
number on the back of your transmitter and then select Confirm.
New Device
Confirm
Cancel
Confirm Device SN
SN: GT6004343M
If the connection is successful, your pump displays a success message. If the
Sensor feature is turned on, the Connection icon
appears on the status
bar.
If your pump does not find your transmitter, see the following procedure, If
your pump does not find your transmitter. If your pump finds multiple devices,
skip to the steps on page 178.
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 177
MP6025958-022 / A
RELEASED