User's Manual

1. From the Home screen, select Suspended before low or Suspended on low.
The SmartGuard screen appears.
2. Select Resume Basal.
3. Select Yes to resume basal delivery.
Wirelessly connecting your pump and transmitter using
Auto Connect
Before you can start using your sensor, you must first wirelessly connect your
pump to your transmitter so they can begin communicating with each other.
The Auto Connect process locates your transmitter without having to enter the
serial number of the transmitter into your pump manually.
Note the following before trying to connect your pump and transmitter:
• You can connect only one transmitter to your pump. If you already have a
transmitter connected to your pump, you must delete it before continuing.
For instructions on deleting a transmitter from your pump, see Deleting the
transmitter from your pump, on page 181.
• Ensure that you are not close to other Medtronic devices that are in search
mode before using Auto Connect. (For example, if another household
member is connecting a BG meter or transmitter to his or her insulin pump.) If
you know multiple people are connecting devices, such as in a training class,
use the Manual Connect process on page 178.
Connecting your pump and transmitter using Auto Connect:
1. Attach your transmitter to the charger and make sure the transmitter is fully
charged. Keep your transmitter attached to the charger.
charger
transmitter
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 175
MP6025958-022 / A
RELEASED