User's Manual

2. Select Low Settings to turn on the feature.
The Low Setup screen appears.
3. Select the time segment. The End time starts flashing.
The Start time of the first time segment is always 00:00. You can set up to
eight time segments, each with a different low limit. If you set more than one
time segment, the time segments must cover a 24-hour period.
4. Set the End time.
5. Set your low limit. You can enter a value from 50 to 90 mg/dL, in increments
of 5 mg/dL.
6. Select the arrow to the right of the End time to select the low settings for
this time segment.
A screen appears showing the available settings for the selected time period.
7. Set the following as desired:
a. Select Suspend before low to have insulin suspended before you reach
your low limit. The Alert on low alert is automatically turned on and
cannot be turned off.
b. Select Alert before low to receive an alert before you reach your low
limit. If Suspend before low is also on, you are alerted when insulin is
suspended.
172 Chapter 10
MP6025958-022 / A
RELEASED