User's Manual

8. Review your settings, and select Save.
High Snooze
High Snooze is available once you have set your High Settings. High Snooze allows
you to set the amount of time that you want to wait before you are reminded that
an alert condition still exists. After a high alert is received and cleared, you will be
alerted again only if the high alert condition still exists after the snooze time you
have set.
Setting the High Snooze:
1. Go to the High Settings screen.
Menu > Sensor Settings > High Settings
The High Settings screen appears.
2. Select Snooze and enter a value from 5 minutes to 3 hours, in 5 minute
increments.
Setting up the Low Settings
The steps below guide you through setting up the Low Settings. For details on the
Low Settings, see Low settings, on page 157.
Note: When you enter your settings, you first define the time segment,
and then select the low settings you want on during that time segment.
To set up the Low Settings:
1. Go to the Low Settings screen.
Menu > Sensor Settings > Low Settings
The Low Settings screen appears.
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 171
MP6025958-022 / A
RELEASED