User's Manual

7. Set the following alerts as desired:
a. Select Alert before high if you want to receive an alert before you reach
your high limit.
b. If you turned on Alert before high, enter the Time before high to set
how soon you want to be alerted before reaching your high limit. You
can enter a value from 5 to 30 minutes.
c. Select Alert on high if you want an alert when you reach your high limit.
d. Select Rise Alert if you want to receive an alert when your SG is rising
quickly.
Skip to step 11 if you do not select Rise Alert.
8. If you turned on the Rise Alert, you need to set the Rise Limit. Scroll down
and select Rise Limit to access this option.
The Rise Limit screen appears.
9. Select the arrow option (one, two, or three arrows) that corresponds to the
rise rate you want to use. To use a custom rate, skip to the next step.
•
Select
for an alert when your SG has been rising at a rate of 1 mg/dL
per minute or more.
■
setting up continuous glucose monitoring
Setting up Continuous Glucose Monitoring 169
MP6025958-022 / A
RELEASED