User's Manual

Manage Settings
Save Settings
Restore Settings
Clear All Settings
Clear Active Insulin
Settings History
Note: If the Clear Active Insulin selection does not appear on the
Manage Settings screen, it means that you have already cleared your
active insulin on the pump.
3. Select Clear Active Insulin.
A confirmation screen appears asking if you want to continue.
4. Select Clear to clear your active insulin value from your pump. If you do not
want to clear your active insulin at this time, select Cancel.
A message appears confirming that your active insulin value is cleared.
Viewing your pump setting history
The Settings History shows you a history of activities you have performed in the
Manage Settings area, such as saving, restoring, or clearing your settings.
1. Go to the Manage Settings screen.
Menu > Utilities > Manage Settings
2. Simultaneously press and hold
and until the Manage Settings menu
appears.
3. Select Settings History.
The Settings History screen appears.
Self Test
Self Test is a safety utility that allows you to check if your pump is operating
properly. This self-diagnostic feature can be used for maintenance or to check that
your pump is operating properly. Self Test is additional to the routine tests that run
independently while the pump operates.
■
general settings
General settings 145
MP6025958-022 / A
RELEASED