User's Manual

When Block Mode is on, you cannot start a new bolus delivery, start a new basal
pattern, or start a new temp basal delivery. However, any previous bolus and basal
deliveries continue normally, and the pump user can stop a bolus delivery at any
time.
When your pump is in Block Mode, you can suspend insulin delivery, receive SG
values, receive BG values from a compatible Bayer meter, review history, test the
pump, and clear alarms and alerts. However, you cannot change any settings.
WARNING: Block Mode does not prevent Remote Bolus deliveries
from your compatible Bayer meter. When your pump is in Block
Mode, you can still deliver a bolus from your compatible Bayer
meter using the Remote Bolus feature.
To turn Block Mode on or off:
1. Go to the Block Mode screen.
Menu > Utilities > Block
2. Select Block Mode to turn the feature on or off.
3.
Select Save. While Block Mode is turned on, a lock icon
displays on the
status bar.
If you are turning on Block Mode, a message appears asking if you would like
to change your Remote Bolus setting as well. This message appears only if
the Remote Bolus setting was on.
4. Select Yes to change Remote Bolus setting.
5. Select Remote Bolus to turn the feature on or off.
6. Select Save.
Carb Unit
The Carb Unit setting determines whether to enter and display carbohydrates in
grams (g) or exchanges (exch). You enter carbohydrate information when using
the Bolus Wizard and recording food in Event Markers.
To change the Carb Unit setting:
1. Go to the Carb Unit screen.
140 Chapter 9
MP6025958-022 / A
RELEASED