User's Manual

When using
this device:
Do this:
Sensor and
transmitter
When Airplane Mode is turned on, your pump does not receive
sensor readings from your transmitter. Your transmitter continues to
collect your sensor readings, and can store up to 10 hours of sensor
data.
When Airplane Mode is turned off, it can take up to 15 minutes
before the pump and the transmitter start to wirelessly
communicate again. The transmitter begins to send the last
10 hours of your sensor information to the pump.
When you turn off Airplane Mode:
If Airplane Mode was turned on for six hours or less, wait
15 minutes for the sensor and transmitter to wirelessly send your
pump the missing sensor glucose readings.
If Airplane Mode was turned on for more than six hours,
disconnect and reconnect the transmitter and sensor, and then
select Reconnect Sensor when it appears on the pump screen.
To turn on or turn off Airplane Mode:
1. Go to the Airplane Mode screen.
Menu > Utilities > Airplane Mode
2. Select Airplane Mode to turn the feature on or off.
3. Select Save.
When Airplane Mode is turned on, the status bar shows the Airplane Mode
icon
in place of the Connection icon.
Audio Options
The Audio Options screen lets you change the volume of most alerts and
notifications, and set the audio and vibrate settings. You can choose one of the
three audio options:
audio
vibrate
138 Chapter 9
MP6025958-022 / A
RELEASED