User's Manual

Note: If the New Reservoir screen has timed out and the Home
screen appears, select Load Reservoir from the Home screen. After
the New Reservoir screen appears, you may have to select Next to
get to the screen shown previously.
6. When the reservoir is inserted, select and hold Load until you see a
checkmark on the screen and your pump beeps or vibrates. Holding Load
moves the piston up in the reservoir compartment until it engages with the
bottom of the reservoir.
Note: If you press the Back button after the loading process begins,
a Loading incomplete alarm will occur.
When the loading process is completed, the following screen appears.
7. Select Next to continue.
8. Follow the instructions in the next section to fill the tubing with insulin.
Filling the tubing
You need to fill the infusion set tubing with insulin before you insert the set into
the body.
■
reservoir and infusion set
Reservoir and infusion set 101
MP6025958-022 / A
RELEASED