User's Manual

Unlocking your pump
Your pump automatically locks when entering sleep mode. When you wake up
your pump from sleep mode, you must unlock your pump before navigating away
from the Home screen. When you press menu
or select , you will be shown a
screen asking you to unlock your pump. Press the highlighted button to unlock
your pump.
The pump will take you to your selected screen after you press the correct button.
If you press an incorrect button, the following screen appears and you will need to
select OK to return to your Home screen and try again.
After your pump is unlocked, it will remain unlocked until you re-enter sleep
mode. For information about the different power modes, or to put your pump to
sleep, see Power modes, on page 34.
Home screen
The Home screen appears by default after you change the battery, when you wake
the pump from sleep mode, and when you are not actively using another screen.
You can navigate to the Home screen from any other screen by pressing and
holding the
button for about one second.
26 Chapter 2
MP6025958-022 / A
RELEASED