User's Manual

• Reservoirs – Use only Medtronic reservoirs. For the MMT-1512 pump model,
use the MMT-326A, 1.8 ml (180-unit) reservoir.
Look on the back of your pump for your model number.
For the MMT-1712 pump model, use either the MMT-332A, 3.0 ml (300-unit)
reservoir or the MMT-326A, 1.8 ml (180-unit) reservoir, depending on your
insulin needs.
• Infusion sets – Medtronic Diabetes provides a variety of infusion sets to fit
your needs. Contact your healthcare professional for help in choosing an
infusion set. Change your infusion set every two to three days per your
infusion set manufacturer's instructions.
Optional devices
• Compatible Bayer blood glucose meter – The 640G system comes with a
compatible Bayer blood glucose meter. It wirelessly connects to your pump,
allowing you to send BG meter readings to your pump. The Remote Bolus
feature allows you to use your meter to start a bolus on your pump. You can
also use this meter to upload system data to your diabetes management
software using the USB port on your computer. For more details, see your
meter user guide.
Note: The compatible Bayer meter may not be available in all
countries.
• Guardian™ 2 Link transmitter (MMT-7731) – used with your pump for
Continuous Glucose Monitoring (CGM). A device that connects to a glucose
sensor. The transmitter collects data measured by the sensor and wirelessly
sends this data to monitoring devices.
• Enlite glucose sensor (MMT-7008) – used with your pump for CGM. The
small part of the continuous glucose monitoring system that you insert just
below your skin to measure glucose levels in your interstitial fluid. The sensor
is a single-use device.
•
CareLink
™
USB (MMT-7306) – used to upload system data to the diabetes
management software using a USB port on your computer.
14 Chapter 1
MP6025958-022 / A
RELEASED