MSC60090 ComfortGLIDE Air ® BLOWER USER MANUAL
CONTENTS Important Safeguards and Precautions .................................................................3 The Purpose of this Manual .........................................................................................4 Product Description – Intended Use ........................................................................4 General safety .....................................................................................................................4 Device Feature .......................
IMPORTANT SAFEGUARDS Do not use Comfort Glide Air Blower in the presence of flammable anesthetics. Precaution – Comfort Glide Repositioning Sheet: 1. Caregivers must verify that all caster brakes on the bed have been engaged prior to patient movement. 2. For safety, always use at least two people during patient movement. 3. Never leave patient unattended on an inflated device. 4. Use this product only for its intended use as described in this manual.
THE PURPOSE OF THIS MANUAL This operation manual is mainly focused on the set-up, cleaning and routine maintenance of the Comfort Glide Air Blower. We recommend keeping this manual handy to answer questions related to the system. PRODUCT DESCRIPTION – INTENDED USE The Comfort Glide Air Blower is a component of the Comfort Glide air system designed to help clinicians safely reposition and move patients.
INFLATING COMFORT GLIDE AIR SHEET a. Patient should be in a supine position with the bed at a 0 degree incline b. Place Comfort Glide Air Sheet underneath the patient. c. Place the Comfort Glide Air Blower directly on flat ground or use the carabiner to hang the unit on the bed frame. d. Plug the power cord into the nearest standard wall outlet e. Connect the air hose to one side of the Comfort Glide Air Sheet air intake opening and securely fasten into place.
MAINTENANCE & TROUBLESHOOTING No daily maintenance is required. It is intended this equipment should only be serviced by qualified and authorized technical personnel. Please contact your Medline representative if the below troubleshooting solutions do not work. Fault/Problem Description Possible Root Cause Solution The Air Blower does not turn on. The Air Blower is not receiving power. Check power cord plug is securely connected and fits snugly into the outlet.
CLEANING & DISINFECTION PROTOCOL 1. Please follow your facility’s guidelines for cleaning and disinfecting the Comfort Glide Air Blower. Ensure that the power unit is off. 2. Unplug the power cord from the wall outlet. 3. Examine the surface of the Air Blower for visible dirt and other substances. 4. Refer to your Bio-Medical Engineering or Infection Prevention Department for your facility’s protocol for cleaning and disinfecting. 5.
2. Changing filter: a. Unscrew 3 screws on the bottom cover. b. Open the filter cover and identify the filter. c. Replace the filter and assemble the parts in reverse order.
WARNING: Switch off the electrical supply to the pump and disconnect the power cable from the electrical outlet before cleaning and inspection. All equipment should be inspected. Any item that is visibly dirty should be properly cleaned or removed. It is recommended that the system is cleaned regularly and after each patient use. SPECIFICATION Control unit Specification Model Name Comfort Glide Air Blower Size in CM (L x W x H) 32.5 X 18 X 24.8 Weight 5 kgs Air Hose 37mm dia x 1.
ELECTROMAGNETIC COMPATIBILITY Electric devices may interact due to electro-magnetic radiation. We recommend a safety distance of at least 1 meter, especially for sensitive equipment. Upon request, we can provide a table with more detailed electromagnetic information.
Manufacturer’s declaration – electromagnetic emissions The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for professional healthcare) specified below. The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment-guidance (for professional healthcare environment) RF emissions CISPR 11 Group 1 The Comfort Glide Air Blower uses RF energy only for its internal function.
Power frequency (50, 60 Hz) magnetic field IEC 61000-4-8 30 A/m 50 Hz or 60 Hz The Comfort Glide Air Blower power frequency magnetic fields should be at levels characteristic of a typical location in a typical professional healthcare environment. 30 A/m 60 Hz NOTE: UT is the a.c. mains voltage prior to application of the test level.
Manufacturer’s declaration – electromagnetic immunity The Comfort Glide Air Blower is intended for use in the electromagnetic environment (for professional healthcare) specified below. The customer or the user of the Comfort Glide Air Blower should assure that it is used in such an environment.
STORAGE AND CARE Comfort Glide Air Blower: Check the power cord and plug for abrasions or excessive wear.
WARRANTY The manufacturer warrants this equipment to be free from defects in material and workmanship for 2 years from the date of delivery. At Manufacturer’s discretion, we agree to service, repair or replace any equipment or part found to be defective at no charge.
Medline Industries, LP, Three Lakes Drive, Northfield, IL 60093 USA Medline United States 1-800-MEDLINE (633-5463) www.medline.com | info@medline.com ©2019 Medline Industries LP. Medline and Comfort Glide are registered trademarks of Medline Industries, LP. Made in Taiwan for Medline Industries, LP, Three Lakes Drive, Northfield, IL 60093 USA.
