User Manual

GPI171-IM27 MDS86850ESKD
Revised: 04/10/2014
8
b) Slide the washer onto the other end of the bolt with the curved side facing the frame (Figure
13)
c) Screw on the four point knob (C) (Fig 14 and Fig 15).
11. Turn the rollator onto the other side so that the wheels that were just installed are on the floor.
Repeat steps 7 through 10 above for the other side.
12. Stand the rollator up so all 4 wheels are on the floor. Make sure all 4 wheels are contacting the
floor.
13. Insert the backrest (D) so that the curved portion faces the front of the unit. Make sure that the
button snaps firmly into the hole so the back is secure (Figure 16).
Figure 16
Figure 14 Figure 15
Figure 13