User Manual

GPI171-IM27 MDS86850ESKD
Revised: 04/10/2014
6
Assembly Instructions
1. Carefully remove the rollator components from the shipping carton. Refer to diagram
(Figure 1) as needed.
2. Examine all parts for shipping damage. DO NOT use the rollator if there is apparent
damage or if any parts (other than the bag) are missing. If there are missing or
damaged parts, please call Medline Customer Care toll free at 1-800-MEDLINE.
3. Remove plastic cover from wheels. Check all of the wheels to see that they are in good
working order and roll freely. Please also ensure that all four wheels touch the ground.
4. Unfold the rollator by pushing down on the folding bracket (I) until the frame is in full
extension.
5. Note alignment of wheels, backrest and brake handles to frame (Figure 2).
6. Lay the rollator over on one side.
7. Insert the front wheel assembly (Figure 3 and Figure 4) on the side facing up. Insert one
triangular knob (L) (Figure 5).
Figure 2: Alignment
Figure 3 Figure 4 Figure 5