User's Manual

ETF-RD-BKQ-02. Instructions for Use (Rev.0)
Page21 / 27
6. Displaying Stored Test Results
The Medisign KT26 BT blood β-ketone meter automatically stores up to five hundred (500) β-ketone test results
together with the date and time. The time and date must be set in order to use the memory function (See Set Date
and Time).
█ Display of Test Results
1. Begin with the meter turned off. Press the button, you will hear a beep sound and the meter will
turn on.
2. The screen will display the date and time. After two (2) seconds, the latest test result is displayed first.
3. Each time you continue to press the > button, the screen will show the test result from the most recent
to the oldest. Use the < or > button to switch stored results.
4. Press button to turn off the meter.
5. The meter will automatically turn off after two (2) minutes of non-use.
NOTE:
 After five hundred (500) data entries, every new test results replaces the oldest (first in, first out).
 Meter memory test results will NOT be erased when battery is removed.