User's Manual

ETF-RD-BKQ-02. Instructions for Use (Rev.0)
Page16 / 27
IMPORTANT
█ Performing the Check Strip Test
The Medisign KT26 Check Strip verifies whether the meter is working properly. Insert the check strip into the
meter. The meter switches on automatically.
If the “OK” Message is NOT displayed on the screen after inserting the Medisign KT26 Check Strip, please
contact Customer Service.
• The range printed on the test strip vial or box is for the control solution only. It has nothing to do with your
blood β-ketone levels.
• The results obtained from control testing do NOT reflect your personal blood β-ketone levels in any way.
• If the control solution test result falls outside of the range provided, do the following:
- Do NOT test your blood β-ketone.
- Make sure you are using the Medisign KT26 Ketone Control Solution.
- Make sure the testing environment is between 10 ~ 40℃.
- Make sure the Medisign Ketone Control Solution and test strips have NOT expired.
- Repeat the test with a new test strip.
- If the problem persists, contact Customer Service. If you have questions or need assistance outside the
operational days and times, please contact your health care professional.