User's Manual

ETF-RD-BKQ-02. Instructions for Use (Rev.0)
Page13 / 27
█ Acoustic Signal
Acoustic signals ( ) are activated by default. If you want to deactivate the acoustic signals, press the < or >
button to change the status from ON (activated) to OFF (deactivated). Confirm your choice with the button.
NOTE: Turning the beep sound on or off do NOT affect your blood β-ketone measurements.
█ Delete Test Results
You have the option to delete the entire test results from meter memory. You will see dEL flashing on the
screen. Press the < or > button to choose between YES (delete all test results) or NO (keep all test results).
Confirm your choice with the button.
█ Exit Settings
Press button for three (3) seconds to exit settings. No matter which steps the meter is set to, it will store the
most recent setting and switches off.
The Meter will automatically turn off after two (2) minutes of non-use.
NOTE: You can start testing by inserting a test strip at any step.